Krita/Photoshop Mapping Table
| Under Construction |
|---|
| This is a new page, currently under construction! |
Mapping of ABR Brush Presets Dynamics to Krita Dynamics
Light blue color is used to identify attributes used to group others (in Photoshop).
|
ATRIBUTE IN ABR (EXAMPLE VALUES) |
FEATURE DESCRIPTION |
MAPPING TO KRITA FEATURES |
|
Brsh (VlLs) 2 |
Amount of brush presets. |
The solution to import the presets with dynamics loaded should be more discussed. |
|
Objc (Objc) brushPreset 40.00 |
Number of the current brush set, used to group all the attributes of the preset. |
- |
|
Nm (TEXT 7) All_On |
Name of the current brush. |
Name of the imported brush preset. |
|
Brsh (Objc) computedBrush 8.00 |
Defines if it is a sampled (based on bitmap) or computed brush and the amount of entries. |
Sampled brushes can be stored in brushes folder (“Predefined Brushes”). Computed brushes can be mapped to Autobrush. |
|
- Dmtr (UntF) 10.00 |
Diameter. Values from 1px to 2500px. |
Scale on predefined brushes. Diameter on Autobrush. |
|
- Hrdn (UntF) 40.00 |
Hardness. |
Soft brush curve setting in autobrush. Not enabled for predefined brushes. |
|
- Angl (UntF) 0.00 |
Angle. Measured in degrees from -180 to 180. |
Angle in autobrush. Must be available for predefined brushes. |
|
- Rndn (UntF) 100.00 |
Roundness. Percent values from 0% to 100%. |
Ratio on autobrush. Must be available for predefined brushes. |
|
- Spcn (UntF) 25.00 |
Spacing. Can be disabled. Values from 0% to 1000%. |
Spacing. Can be disabled in photoshop, but not in Krita. Apparently 1.00 value equals to disabled in PS, which is default spacing. |
|
- Intr (bool) 1 |
Not figured out. Probably Smoothing. |
Not figured out. If smoothing, could be mapped to the Softness control? |
|
- flipX (bool) 1 |
Flip X. Checkbox. |
No static version implemented yet, bu can be mapped to Mirror>Horizontally with curve off. |
|
- flipY (bool) 1 |
Flip Y. Checkbox. |
No static version implemented yet, but can be mapped to Mirror>Vertically with curve off. |
|
- sampledData (TEXT 37) |
Appears only on sampled brushes. |
- |
|
useTipDynamics (bool) 1 |
Shape Dynamics. Checkbox. Enable or disable tip dynamics. |
There's no checkbox in Krita to enable or disable tip dynamics, they are scattered over other checkboxes. |
|
flipX (bool) 1 |
Flip X. Checkbox. |
Can be mapped to Mirror>Horizontally with fuzzy. |
|
flipY (bool) 1 |
Flip Y. Checkbox. |
Can be mapped to Mirror>Vertically with fuzzy. |
|
minimumDiameter (UntF) 70.00
|
Minimum Diameter. Percent value from 0% to 100%. |
Can be mapped to the size sensor curve.
|
|
minimumRoundness (UntF) 30.00 |
Minimum Roundness. Percent value from 0% to 100%. |
Mapped to the curve of the fuzzy roundness sensor.
|
|
tiltScale (UntF) 80.00 |
Tilt Scale. Percent value from 0% to 200%. Available with Pen Tilt control only. |
Not figured out. |
|
SzVr (Objc) brVr 3.00 |
Size Control. Group with three values: |
|
|
- bVTy (long) 3 |
Control. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 - Rotation |
Can be mapped to Size. Off – Use curve off Fade – Fade Pen Pressure – Pressure Pen Tilt – Tilt-X, Tilt-Y Stylus Wheel – Not implemented. Rotation - Rotation |
|
- fstp (long) 25 |
Fade Step. Used with Fade controller on. |
Can be mapped to Fade length on Size>Fade. |
|
- jitter (UntF) 60.00 |
Size Jitter. Percent value from 0% to 100% |
Not implemented. |
|
angleDynamics (Objc) brVr 3.00 |
Angle Dynamics. Group with three values: |
|
|
- bVTy (long) 1 |
Control. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation 6 – Initial Direction 7 – Direction |
Not implemented. |
|
- fStp (long) 100 |
Fade Step. Used when Fade controller is chosen. |
Not implemented. |
|
- jitter (UntF) 90.00 |
Angle Jitter. Percent value from 0 to 100% |
Not implemented. |
|
roundnessDynamics (Objc) brVr 3.00 |
Roundness Control. Group with 3 values: |
|
|
- bVTy (long) 1 |
Control. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
Not implemented. |
|
- fstp (long) 20 |
Fade Step. Used when Fade controller is chosen. |
Not implemented. |
|
- jitter (UntF) 10.00 |
Roundness Jitter. Percent value from 0 to 100%. |
Mapped to the curve of the fuzzy roundness sensor.
|
|
useScatter (bool) 1 |
Scattering. Dynamic activation. |
Can be mapped to Scatter. |
|
Spcn (UntF) 100.00 |
Spacing(?). Unknown controller. Apparently aways 100%. |
- |
|
Cnt (doub) 6.00 |
Tip Count. Value from 1 to 16. |
Not implemented. |
|
bothAxes (bool) 1 |
Both Axes. Checkbox. |
Can be mapped to Axis X and Axis Y checkboxes. |
|
countDynamics (Objc) brVr 3.00 |
Tip Count Dynamics. Group with 3 values: |
|
|
- bVTy (long) 1 |
Control. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
Not implemented. |
|
- fStp (long) 80 |
Fade Step. Used when Fade controller is chosen. |
Not implemented. |
|
- jitter (UntF) 70.0 |
Count Jitter. Percent value from 0 to 100%. |
Not implemented. |
|
scatterDynamics (Objc) brVr 3.00 |
Scatter dynamics. Group with three values: |
|
|
- bVTy (long) 1 |
Control. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
Can be mapped to Scatter. Off – Use curve off. Fade – Fade Pen Pressure – Pressure Pen Tilt – Tilt-X, Tilt-Y Stylus Wheel - Not implemented Rotation - Rotation |
|
- fStp (long) 50 |
Fade Step. Used when Fade controller is chosen. |
Can be mapped to Scatter>Fade>Fade length. |
|
- jitter (UntF) 40.00 |
Scatter Jitter. Percent from 0 to 100%. |
Not implemented. |
|
dualBrush (Objc) dualBrush 10.00 |
Dual Brush. If off the number of entries will be 1.00. If on, it will be a number according to the number of entries on the second brush. |
Not implemented. |
|
- useDualBrush (bool) 1 |
Use Dual Brush. Checkbox. |
- |
|
- Flip (bool) 1 |
Flip the brush randomly. Checkbox. |
- |
|
- Brsh (Objc) computedBrush 8.00 |
Group of entries for the second brush. Same as non-dual brush: Dmtr, Hrdn, Angl, Rndn, Spcn, Intr, flipX, flipY. |
- |
|
- BlnM (enum) BlnM CBrn |
Blending mode. Possible values: Mltp – Multiply Drkn – Darken Ovrl – Overlay ? - Color dodge Cbrn – Color Burn linearBurn – Linear Burn ? - Hard Mix |
- |
|
- useScatter (bool) 1 |
Use Scatter. Not a visible control. |
- |
|
- Spcn (UntF) 100.00 |
Spacing. Percent value from 1 to 1000%. |
- |
|
- Cnt (doub) 8.00 |
Count. Value from 1 to 16. |
- |
|
- bothAxes (bool) 1 |
Both Axes. Checkbox. Scatter both axes. |
- |
|
- countDynamics (Objc) brVr 3.00 |
Tip count dynamics. Group with 3 values: |
- |
|
- bVTy (long) 0 |
Control. Available controllers for tip count: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
- |
|
- fStp (long) 25 |
Fade Step. Used when Fade controller is chosen. |
- |
|
- jitter (UntF) 0.00 |
Count Jitter. Percent from 0% to 100%. |
- |
|
- scatterDynamics (Objc) brVr 3.00 |
Scatter dynamics. Group with 3 values: |
- |
|
- bVTy (long) 0 |
Control. Available controllers for scatter: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
Can be mapped to Scatter. Off – Use curve off. Fade – Fade Pen Pressure – Pressure Pen Tilt – Tilt-X, Tilt-Y Stylus Wheel - Not implemented Rotation - Rotation |
|
- fStp (long) 25 |
Fade Step. Used when Fade controller is chosen. |
Can be mapped to Scatter>Fade>Fade length. |
|
- jitter (UntF) 70.00 |
Scatter Jitter. Percent from 0% to 100%. |
Not implemented. |
|
brushGroup (Objc) brushGroup 1.00 |
Brush Group. Unknown. |
- |
|
- useBrushGroup (bool) 0 |
Use Brush Group. |
- |
|
useTexture (bool) 1 |
Texture. Dynamics activation. |
Can be mapped to Texture>Pattern. But it would need to import also the image used as texture. |
|
TxtC (bool) 1 |
Texture each tip. Checkbox. |
Not implemented. |
|
textureBlendMode (enum) BlnM CBrn |
Texture blend mode. Combobox with values: Mltp – Multiply ? - Subtract Drkn – Darken Ovrl – Overlay ? - Color Dodge Cbrn – Color Burn |
Texturing mode: Multiply - Multiply Subtract - Subtract Darken - Not implemented. Overlay - Not implemented. Color Dodge - Not implemented. Color Burn - Not implemented. |
|
textureDepth (UntF) 10.00 |
Texture depth. Percent from 0 to 100%. |
Can be mapped to Texture>Pattern>Strength. |
|
minimumDepth (UntF) 20.00 |
Minimum Depth. Percent from 0 to 100%. Enabled when Texture Each Tip in on. |
Not implemented. |
|
textureDepthDynamics (Objc) brVr 3.00 |
Texture Depth Dynamics. 3 values: |
Cab be mapped to Texture>Pattern>Strength dynamics |
|
- bVTy (long) 1 |
Control. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
Off - Curve off Fade - Fade Pen Pressure - Pressure Pel Tilt - Tilt X, Tilt Y Stylus Wheel - Not implemented. Rotation - Rotation |
|
- fStp (long) 40 |
Fade Step. Used when Fade controller is chosen. |
Can be mapped to Scatter>Fade>Fade length. |
|
- jitter (UntF) 30.00 |
Depth Jitter. Percent from 0 to 100%. |
- |
|
Txtr (Objc) Ptrn 2.00 |
Texture block. Group with 2 values: |
Not implemented. |
|
- Nm (TEXT 8) Bubbles |
Name. |
- |
|
- Idnt (TEXT 37) b7334da0-122f-11d4-8bb5-e27e45023b5f |
Identity. |
- |
|
textureScale (UntF) 90.00 |
Texture Scale. Percent from 1 to 1000%. |
Can be mapped to Texture>Pattern>Scale. |
|
InvT (bool) 1 |
Invert texture scale. Checkbox. |
Can be mapped to Texture>Pattern>Invert Texture. |
|
usePaintDynamics (bool) 1 |
Other Dynamics. Dynamics Activation. |
- |
|
prVr (Objc) brVr 3.00 |
Flow Jitter. Group with 3 values: |
Not implemented. Krita could have a separate section for Flow dynamics instead of being inside Opacity dynamics. That would allow much better integration of abr brushes. |
|
- bVTy (long) 1 |
Control. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
- |
|
- fStp (long) 90 |
Fade Step. Used when Fade controller is chosen. |
- |
|
- jitter (UntF) 80.00 |
Flow Jitter. Percent from 0 to 100%. |
- |
|
opVr (Objc) brVr 3.00 |
Opacity Jitter. Group with 3 values: |
|
|
- bVTy (long) 1 |
Control for Jitter. Available controllers: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 – Rotation |
- |
|
- fStp (long) 70 |
Fade Step. Used when Fade controller is chosen. |
Can be mapped to Opacity>Fade>Fade length |
|
- jitter (UntF) 60.00 |
Opacity Jitter. Percent from 0 to 100%. |
Opacity sensor, stacking needed. |
|
useColorDynamics (bool) 1 |
Color Dynamics. Dynamics activation. |
Can be mapped to HSV dynamics. |
|
clVr (Objc) brVr 3.00 |
Color Dynamics. Group with 3 values: |
|
|
- bVTy (long) 1 |
Control. Available controllers for foreground/background jitter: 0 – Off 1 – Fade 2 – Pen Pressure 3 – Pen Tilt 4 – Stylus Wheel 5 - Rotation |
Can be mapped to Value? Off – Use curve off Fade – Fade Pen Pressure – Pressure Pen Tilt – Tilt-X, Tilt-Y Stylus Wheel - Not implemented Rotation - Rotation |
|
- fStp (long) 70 |
Fade Step. Used when Fade controller is chosen. |
Can be mapped to Value(?)>Fade>Length |
|
- jitter (UntF) 60.00 |
Foreground/Background Jitter. Percent value from 0% to 100%. |
Not implemented. |
|
H (UntF) 20.00 |
Hue Jitter. Percent value from 0% to 100% |
Can be mapped to Hue. |
|
Strt (UntF) 30.00 |
Saturation Jitter. Percent value from 0% to 100%. |
Can be mapped to Saturation. |
|
Brgh (UntF) 40.00 |
Brightness Jitter. Percent value from 0% to 100%. |
Can be mapped to Saturation, although “fake”. |
|
purity (UntF) 50.00 |
Purity (Color shift distance from neutral axis). Percent value from 0% to 100%. |
Not implemented. |
|
Wtdg (bool) 0 |
Wet Edges. Checkbox. |
Not implemented. |
|
Nose (bool) 0 |
Noise. Checkbox. |
Not implemented. With Autobrush, this could be mapped to Density. |
|
Rpt (bool) 1 |
Airbrush. Checkbox. |
Can be mapped to Airbrush. |