Plasma/Active/Installation
Installing Plasma Active
Live Images
These can be used as testing base and to track progress.
Balsam Professional
open-slx creates regularly updated packages of Balsam Professional for Plasma Active. You can try the Live ISO from a USB stick. Download the Balsam Professional live image, which is based on openSUSE here (use the highest version numbered iso file).
MeeGo Plasma Active
basysKom creates regularly updated packages of Plasma Active based on MeeGo.
This image is an adaption of the public meego-tablet-ia32-pinetrail variant and it is bootable on x86 based devices like WeTab, ExoPC or the Idea Pad. Login Data: User meego passwd meego; User root passwd meego
You can try the installable Live ISO from a USB stick. Download the latest demo and testing live image (sha1).
Deploying a MeeGo Plasma Active ISO Image to a Flashdrive
After you have downloaded the ISO image its a good idea to validate the image against transmission errors. An SHA1 checksum file should be available for every image. You can do this by comparing the hash on equality between image and related checksum file via following command:
user@host# sha1sum <image file>
In case of an divergent output, please download the image one more time and check again. After that feel free to deploy the image to an not mounted USB flashdrive. In the following example we use the tool 'dd' for this:
root@host# dd if=<image file> of=/dev/<USB flashdrive> bs=1M
Please note, the usage of this tool is potential dangerous! In case of an mistaken output device, all data on it will be unrecoverable lost.
To get the correct output device for the this tool, please follow the described steps below:
- 1. Remove all mobile flashdrives from your host system.
- 2. Call the command below and note the output.
user@host# cat /proc/partitions
major minor #blocks name
8 0 3000000 sda
8 1 2999998 sda1
- 3. Plug the Flashdrive for deploying into the host system.
- 4. Call the following command and note the output again.
user@host# cat /proc/partitions
major minor #blocks name
8 0 30000000 sda
8 1 29999998 sda1
8 16 3872256 sdb
8 17 594944 sdb1
- 5. In this example the correct dd parameter is sdb in the position of <USB flashdrive>.
Deploying a MeeGo Plasma Active ISO Image to VirtualBox
Before you can starte the image via VirtualBox, please configure the virtual device like below.
VirtualBox OSE Manager
Settings
├── General
│ └── Basic
│ ├── Name --> e.g. Plasma-contour
│ ├── Operating System --> Linux
│ └── Version --> Linux 2.6
├── System
│ ├── Motherboard
│ │ ├── Boot Order
│ │ │ ├── CD/DVD-ROM
│ │ │ └── Hard Disk
│ │ └── Base Memory --> 1024MB
│ └── Processor
│ └── Enable PAE/NX
├── Display
│ └── Video
│ ├── Video Memory --> 128 MB
│ └── Enable 3D Acceleration
└── Storage
├── IDE Controller
│ └── IDE Secondary Master
│ └── Set up the virtual CD/DVD drive
│ └── <ISO image>
└── SATA Controller
└── Hard Disk
└── Set up the virtual hard disk
├── Dynamically expanding storage
└── Virtual Size --> 8.00 GB
Please note, only live image since 2011-07-20-10-50-meego-plasma-contour-in-progress-USB-live.iso are runable via VirtualBox.
The scope of contour development is for usage on tablet devices. By this reason you have to activate the mouse cursor by your self. The following steps explains how make a mouse cursor available
- 1. The boot has finished
- 2. Switch to plain teminal console (tty1) by pressing "right strg" + "f1"
- 3. Login as user root (passwd meego)
- 4. Change to system runlevel 3 (text mode) by
root@meego# init 3
- 5. Switching back to tty1 by pressing "right strg" + "f1" again
- 6. Edit file
root@meego# nano /etc/sysconfig/uxlaunch
Remove or comment (#) following line
xopts=-nocurser
Save the file via "left strg" + "o" an close by "left strg" + "x"
- 7. Change back to system runlevel 5 (graphic mode) by
root@meego# init 5
Please note, if you like to install our live image to an VirtualBox hard drive, you have to remove the live image form the virtual CD/DVD-ROM after installation. This will be done after Power off the machine via VirtualBox OSE Manager.
Settings
└── System
└── Motherboard
└── Boot Order
├── CD/DVD-ROM --> disable
└── Hard Disk
Booting the Live Image on a WeTab/ExoPC
1. Plug the flashdrive to the WeTab/ExoPC.
2. Get the WeTab/ExoPC running.
3. Press the power (top left underside) + softtouch (top left upperside) button till reboot.
4. Choose inside the boot menu via softtouch button the installation or live mode (short tab to switch entry, long tab to choose).
Installation on openSUSE
In order to install the latest development snapshots on openSUSE 11.4, you have to add two repositories to your system. These update kdelibs and kde-runtime to a patched 4.7 which contains additions in QML bindings and improvements needed to run the development version for Plasma Active. If you would like to try it in a virtual machine, we recommend Virtualbox, which provides accelerated graphics capable of "desktop effects".
Important: this procedure will upgrade your KDE installation to snapshots of 4.7, replacing any KDE packages you have installed. Some versions of these packages, for example kdepim4 and kdepim4-runtime, are built for a mobile target and the desktop versions of their apps will not run properly. Running a newer version of KDE may update users' configuration files in a way that is not backward-compatible with previous versions of the applications, so it is advised to use a development installation or backup your KDE configuration. If you don't know how to do this, stay with the Live image.
Installation Recipe
Preparation
As you are going to install packages from a different source, or so-called "vendor", you can make your life easier by telling zypper to automatically resolve packages across vendors. In /etc/zypp/zypp.conf, change the following line
solver.allowVendorChange = false
to
solver.allowVendorChange = true
Repository Setup
Register KDE:Unstable:SC and KDE:Active repositories:
zypper addrepo --refresh \
http://download.opensuse.org/repositories/KDE:/Release:/47/openSUSE_11.4 kr47
zypper addrepo --refresh \
http://download.opensuse.org/repositories/KDE:/Active/openSUSE_11.4/ plasma-active
Increase KDE:Active packages' priority relative to KDE:Release:47, because the git snapshot versioning is otherwise lower than those in KDE:Release:47, and we want the KDE:Active versions that are built with Active-specific options:
zypper modifyrepo --priority 90 plasma-active
Package Installation
Update all packages to the latest versions, trust the keys for the repos. NOTE: if you have other additional repositories than these registered in your system, YOU are responsible for making sure they are compatible.
zypper dist-upgrade
Finally, install the Plasma Active specific packages:
zypper install plasma-contour-config
This will install and setup the Plasma Active shell, which is contained in the plasma-mobile package (plasma-mobile has different sets of QML user interfaces per UI profile). zypper will ask you to accept the key. It will also suggests vendor changes for some packages. Accept these options.
Running Plasma Active
If you have installed the plasma-tablet-config package, your system will automatically start into Plasma Active. Just make sure you have autologin enabled in Yast and restart your system.
From a full Plasma Desktop (or Netbook) user experience, you can also switch at runtime to Plasma Active as follows (as user logged into the the X11 session):
# Quit your plasma session kquitapp plasma-desktop or kquitapp plasma-netbook # Start Plasma Active plasma-device # It is also possible to run Plasma Active in a window, # this is useful for testing purposes: plasma-device --nodesktop
Installation of Plasma Active from sources
While the recommended way to test Plasma Active is with the above recipe using the binary packages, it is possible to build Plasma Active from the source repository, who wants to try the bleeding edge repository can build plasma-mobile from sources. The recommended way is to follow the usual kde from sources build instructions. It is also possible to use the binary kde packages as a base.
It is necessary to install some packages (and their dependencies) to have a working development environment: sudo zypper install gcc gcc-c++ git cmake, kdelibs-devel
Now clone the plasma mobile source repository and build:
git clone git://anongit.kde.org/plasma-mobile cd plasma-mobile mkdir build cd build cmake .. -DCMAKE_INSTALL_PREFIX=/usr make sudo make install
Installing Additional Software
There are a few KDE projects that have created touch friendly versions of their applications already. These versions are included in the plasma-active repository. Currently, these are:
- Calligra Active - Install package calligra-active
- Kontact Touch - Install package kontact
In addition, some applications already work quite well together with active. The following is a list of applications that work ok on a touchscreen:
- Okular - For viewing documents.
- Marble - Virtual globe, includes routing support.
- Bangarang - Media player, uses Nepomuk for listing media.
- Dolphin - File manager.
Some of these applications, like Bangarang, are not included in either the KDE:Release or plasma-active repositories. Instead, they can be installed from the KDE:Extra repository by adding it to zypper with the following command:
#Add KDE:Extra repository zypper addrepo --refresh http://download.opensuse.org/repositories/KDE:/Extra/KDE_Release_47_openSUSE_11.4 kde-extra #Install Bangarang zypper install bangarang
MeeGo
Installation
A repository of most of KDE components, including Plasma Active for MeeGo is at https://build.pub.meego.com/project/show?project=Project%3AKDE%3ATrunk%3ATesting and is available for both i586 and ARM, which is added by running the following command if you are using MeeGo trunk
zypper ar http://repo.pub.meego.com/Project:/KDE:/Trunk:/Testing/Trunk/Project%3aKDE%3aTrunk%3aTesting.repo
or for MeeGo 1.2 users:
To install the software run the following command:
zypper install plasma-active
UX Launch
uxlaunch is the MeeGo component that actually launches the shell. There are two ways of switching the default MeeGo Tablet UX shell to Plasma.
Changing UX permanently
Edit /etc/sysconfig/uxlaunch and change the session key to "/usr/bin/startkde".
Dynamic UX selection at boot
Finally, to switch to using the plasma tablet UX in MeeGo, use the uxselector project, following the instructions found here: http://wiki.meego.com/MeeGo_Desktop/Changing_Desktops#UXSelect_Switcher_Tool_.28alpha.29 - edit the /etc/xdg/aard/uxselect.conf file to include the following section:
[plasma] name=Plasma Active description=The Plasma Active Tablet UX path=/usr/bin/startkde
and add the text plasma text to the uxlist property in the General section.
Known Issues
The Meego tablet UX installs a number of files in /etc/xdg/autostart that are also executed when running Plasma Active, resulting in elements of the Meego tablet UX showing up nevertheless. Workaround is to rename/remove that folder.
Installing Additional Software
There are a few KDE projects that have created touch friendly versions of their applications already. These versions are included in the MeeGo repository. Currently, these are:
- Calligra Active - Install package calligra-active
- Kontact Touch - Install package kontact-touch
In addition, some applications already work quite well together with Active. The following is a list of applications that work ok on a touchscreen:
- Okular - For viewing documents.
- Marble - Virtual globe, includes routing support.
- Konsole - Support for virtual keyboard
MeeGo system image
For a complete ready to go image of Plasma Active see Live Images.
Other Systems
If you have installed Plasma Active on a system not yet listed here, please add detailed installation instructions in a new section.