Guidelines and HOWTOs/Debugging/Debugging with GDB

Template:I18n/Language Navigation Bar This is a short tutorial on debugging KDE applications. Throughout this tutorial I will use "kedit" as an example application.

Debugging with GDB

The recommended version of gdb to use is version 4.95 or higher; older versions have problems generating proper backtraces.

There are three ways to debug an application with gdb:

1. You can start the application from within gdb.
2. You can attach gdb to an already running application.
3. You can run gdb after an application has crashed using a core file.

Starting applications from within gdb

To start an application with gdb you can start gdb as follows:

> gdb kedit
GNU gdb 4.95.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu"...
(gdb)

You can now set the command line arguments that you want to pass to kedit with the gdb command "set args":

(gdb) set args myfile.txt
(gdb)

gdb has loaded the kedit executable on startup but it hasn't loaded any of the libraries yet. This means that you can't set any breakpoints in the libraries yet. The easiest way to do that is to set a breakpoint in the first line of main and then start the program:

(gdb) break main
Breakpoint 1 at 0x804855c
(gdb) run
Starting program: /ext/kde2.0/bin/kedit myfile.txt
Breakpoint 1 at 0x4002cf18: file kedit.cpp, line 1595.

Breakpoint 1, main (argc=2, argv=0xbffff814) at kedit.cpp:1595
1595            bool have_top_window = false;
Current language:  auto; currently c++
(gdb)

You can now set breakpoints everywhere. For example lets set a breakpoint in the KApplication constructor. Unfortunately, gdb is not very good in handling C++ names, so it is not really possible to specify the constructor directly after the break command. Instead we look up a line of source code where we want to place the breakpoint. An external editor is of great use at this point. With the list command we can select the source file we are interested in and verify that we have found the correct source line:

(gdb) list kapp.cpp:220
215     parseCommandLine( argc, argv );
216 }
217
218 KApplication::KApplication( bool allowStyles, bool GUIenabled ) :
219   QApplication( *KCmdLineArgs::qt_argc(), *KCmdLineArgs::qt_argv(),
220                 GUIenabled ),
221   KInstance( KCmdLineArgs::about),
222   d (new KApplicationPrivate)
223 {
224     if (!GUIenabled)
(gdb) break 224
Breakpoint 2 at 0x4048aa7e: file kapp.cpp, line 224.
(gdb)

We can now continue the execution of kedit. Execution will stop when it hits a breakpoint or when the program exits. In this case execution will stop in the first line of the KApplication constructor:

(gdb) continue
Continuing.
Qt: gdb: -nograb added to command-line options.
         Use the -dograb option to enforce grabbing.

Breakpoint 2, KApplication::KApplication (this=0xbffff6a8, allowStyles=true,
    GUIenabled=true) at kapp.cpp:224
224         if (!GUIenabled)
(gdb)

Important: many applications use "KUniqueApplication" to ensure that only one instance can exist at a given time in a given KDE session. This is the case for kwin, kontact, konsole, plasma, etc. To debug those applications, attach to them while they're running (see next session) or use set args --nofork

Attaching gdb to already running applications

Sometimes it is not practical to start an application from within gdb. E.g. in those cases where you didn't know the application was about to crash :-) When you get the friendly DrKonqi dialog informing you about a crash you are just in time to start your debugger.

First lets attach gdb to an application that hasn't crashed (yet).

You start with finding the process of the application with e.g. "ps -aux":

> ps -aux | grep kedit
bastian  21570 15.1  6.8 13740 8800 pts/6    S    15:34   0:01 kedit
bastian  21582  0.0  0.3  1132  412 pts/6    R    15:34   0:00 grep kedit

From this you learn that kedit has process id 21570. Now you can start gdb as follows:

> gdb kedit 21570
GNU gdb 4.95.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu"...
/home1/bastian/21570: No such file or directory.
Attaching to program: /ext/kde2.0/bin/kedit, Pid 21570
Reading symbols from /ext/kde2.0/lib/kedit.so.0...done.
Loaded symbols for /ext/kde2.0/lib/kedit.so.0
...
Reading symbols from /lib/ld-linux.so.2...done.
Loaded symbols for /lib/ld-linux.so.2
Reading symbols from /lib/libnss_compat.so.2...done.
Loaded symbols for /lib/libnss_compat.so.2
Reading symbols from /lib/libnsl.so.1...done.
Loaded symbols for /lib/libnsl.so.1
0x40c3d88e in __select () from /lib/libc.so.6
(gdb)

You will usually end up in the middle of a select() call from the event-loop. This is the place where a KDE application spends most of its time, waiting for things to happen.

A backtrace will typically look something like this:

(gdb) bt
#0  0x40c3d88e in __select () from /lib/libc.so.6
#1  0x40a22844 in __DTOR_END__ () at fam.c++:356
#2  0x407293bf in QApplication::enter_loop (this=0xbffff6e8)
    at kernel/qapplication.cpp:2552
#3  0x406b1d7b in QApplication::exec (this=0xbffff6e8)
    at kernel/qapplication_x11.cpp:2217
#4  0x4002d500 in main (argc=1, argv=0xbffff854) at kedit.cpp:1662
#5  0x40bbba5e in __libc_start_main (main=0x8048568 <main>, argc=1,
    argv=0xbffff854, init=0x8048514 <_init>, fini=0x80486cc <_fini>,
    rtld_fini=0x4000aa20 <_dl_fini>, stack_end=0xbffff84c)
    at ../sysdeps/generic/libc-start.c:92
(gdb)

Improving your gdb experience for KDE/Qt applications

In the SVN path named "kdesdk", you will find the file kdesdk/scripts/kde-devel-gdb. This file contains a few macros that help looking into some Qt objects (for instance QString). See the beginning of the file for instructions on how to use it.

If you want to go even further, you can apply those patches to the gdb source, to fix a few annoyancies in gdb:

• source.c: don't try to open a directory in "." that has the same name as the executable we want to open (not needed for gdb-6.0 and above)
• symfile.c: no prompting at end of page while opening shared libraries (not needed for gdb-6.2 and above)
• solib.c: less output when opening shared libraries

Those patches are maintained by David Faure.

Have fun with gdb! Hmm, ok, the definition of 'fun' is very relative...