Revision as of 22:10, 19 December 2013

These instructions are for Unix and similar operating systems. For Windows, see the building Calligra on Windows page.

Preparation

Warning

First, to avoid conflicting copies of software, make sure you do not have other copy of Calligra or KOffice either installed through the package manager of your distribution or installed in any other way. Calligra and KOffice are mutually exclusive!

Warning

Follow this guide as an ordinary user. Do not login as root!

Warning

Some distributions (*Buntu, Arch) are now making Qt5 the defaulft! That does not work. Do not try to use Qt5, use Qt4.

Recommended Setup

Here is recommendation of a directory structure:

$HOME/kde4/src/: source code
$HOME/kde4/build/calligra: directory that Calligra will be built in
$HOME/kde4/inst: directory that Calligra will be installed in

The build directory is needed because you cannot (or should not) build Calligra inside the source directory; the source and build directory have to be separated.

Create these directories with:

mkdir -p ~/kde4/src; mkdir -p ~/kde4/build; mkdir -p ~/kde4/inst

Advantages of this setup:

It is possible to have different builds (e.g. with different options out of the same source code)
David Faure's scripts can be used to make development easier. With those scripts "make" can be typed in the source directory and building will happen in the right (build) directory automatically.

Also, check the Techbase instructions on setting up a build environment. That contains some useful scripts and functions.

Getting the Source Code

There are two most useful options:

Get the source code for the latest stable version.
Get the source code for the current development version. Needed to test, check and give feedback about features that is in development and have not been released yet.

If unsure pick the stable version.

Latest Stable Version

The latest stable Calligra version is 3.1.0.

It can be downloaded as single archive file from http://download.kde.org/stable/calligra-3.1.0/calligra-3.1.0.tar.xz

If you prefer, stable versions are also available on the git repository too. To get stable version x.y from git, first clone the repository (git clone kde:calligra) and switch to calligra/x.y branch (that's the notation). Full procedure of cloning is available in the Get the source code for the development version section below.

The branch for the latest stable version is calligra/3.1 and it contains code updates for current minor stable release 3.1.0 plus updates for the next minor stable (if there are any).

Development Version

The latest development version of Calligra is 3.1.0 Alpha; developers always refer to it as to Master. Applications from Master should always compile and be reasonably stable. Calligra developers never place experimental features there. Once tested and released, Master becomes the new current stable version 3.1.

TODO: Here we should explain local branches, staging and always-release-ready Master, if we have that setup.

Option 1: directly from git

To retrieve the source code from Git you have to use the following setup:

Add the following text to your ~/.gitconfig:

[url "git://anongit.kde.org/"]
    insteadOf = kde:
[url "ssh://[email protected]/"]
    pushInsteadOf = kde:

Then execute

$ git clone kde:calligra

By using the kde: prefix, read access will automatically happen over Git, and authenticated SSH is only required for pushes.

Note that pushing your changes will only work if you have a KDE developer identity (https://identity.kde.org/register.php).

The $HOME/kde4/src/calligra directory will be created regardless of the way how the source code has been downloaded.

Option 2: download a repository tarball

Go to https://projects.kde.org/projects/calligra/repository. Press the "Tarball" button. Copy the url text and paste it on your command line. It will look like:

wget -c http://anongit.kde.org/calligra/calligra-latest.tar.gz

Unpack and cd into directory, then run

$ ./initrepo.sh

From now on, you can run

$ git pull

to update, or

$ git rebase origin/master

if you have local changes

Option 3: if beta or rc version was released, the source code for the latest beta can be found on KDE's ftp calligra-latest. Uncompress the code so that $HOME/kde4/src/calligra is created.

Working with Multiple Versions

You will often want to have more than one build environment in parallel, for example if you want to work on both stable and unstable branches at the same time or several feature branches.

Recommended way is to use git-new-workdir tool. The solution is based on a single git repository clone multiplied to many separate source directories for each branch you wish to use, all without performing full clone (what consumes disk space and requires fetching each clone separately). It is explained in the Techbase article Multiple Work Branches and you can find the script there.

Example commands to have code for both Calligra 3.1.x and master versions:

To get the master into $HOME/kde4/src/calligra:

$ git clone kde:calligra

Then, to get the Calligra 3.1.x into $HOME/kde4/src/calligra-3.1:

$ git-new-workdir $HOME/kde4/src/calligra $HOME/kde4/src/calligra-3.1 calligra/3.1

(which means git-new-workdir <original clone's directory> <new source directory> <branch name>)

Build Requirements

This section provides information about hard (required) and optional software packages needed to build the Calligra software.

Required Dependencies

Note

A note for developers: to add (or remove) a hard dependency, an explanation of the reason, and possibly a discussion must be posted in advance on [email protected]. The new dependency need to be packaged in the most widely used distributions (Debian, Fedora Core, OpenSuSE, (K)ubuntu). First try to make your new feature optional.

Following are the general must-have dependencies for Calligra (unless you really need to do otherwise, just install relevant binary packages):

Qt 4.7.0 or newer
kdelibs and kdelibs development files
- the minimal requirement is currently 4.3.0, that or any later release packaged in your distribution is OK
- On opensuse the development package is called libkde4-devel; on Ubuntu and Debian it is called kdelibs5-dev. (TODO: add info for other distributions)
- Calligra should also build fine with either kdelibs from git repository (see techbase for an explanation on how to compile kdelibs from svn), needed for parts of Calligra build with the Mobile Frameworks Profile of the KDE platform (Calligra Words, Calligra Sheets, Calligra Stage, krita)
kdebase/runtime 4.3 or newer
cmake 2.6.2 or newer
lcms 2.4 or newer
libpng development package (libpng14-devel on opensuse, libpng-dev on Ubuntu/Debian)
- development packages for other libraries may be needed; on ubuntu/Debian these can be installed using 'apt-get build-dep kdelibs5'

For Calligra Sheets:

libeigen 2.0

For Krita:

libeigen 2.0
libexiv2 >= 0.16

For Stage:

boost

For Kexi:

sqlite3 and sqlite3-devel packages (package names can differ on various distributions), version >= 3.7.10
icu, libicu and libicu-devel (unicode support)

Optional Dependencies

All optional dependencies are logged at the end of the cmake run, so it is easy to figure out what is missing. The buildsystem also reports what component will not be built because given missing dependency.

For users who want to use Krita it is also recommended to install the Vc library. It is optional, but makes the performance much higher.

Distribution Specific Instructions

Debian-based Distributions

On Debian, Ubuntu and Kubuntu, all the dependencies used for the packages can be installed by running:

sudo apt-get build-dep calligra

On Linux Mint , you'll need to activate the software sources repositories manually. ( Search for 'Software Sources' in your menu then open it, On the tab 'Linux Mint Software' , check to activate 'Source code', On the tab 'Other Software' check to activate 'Ubuntu **.** <name> (source code) then close the windows to finish )

Those optionnal packages also help to build and run it in a non-KDE environment :

sudo apt-get install cl-fftw3 liblcms2-dev cmake liblcms2-2 liblcms2-utils git xserver-xorg-input-wacom oxygen-icon-theme kde-runtime wget liblcms1-dev kdebase-runtime systemsettings qt4-qtconfig qtcurve libwpg-tools libwpd-tools poppler-utils opengtl-tools libcxxtools-dev phonon-backend-gstreamer

OpenSuSE

All the dependencies used for building Calligra can be installed by running:

zypper si -d calligra

( Note : enable in 'Yast' > 'Software Repository' the sources packages )

Fedora

All the dependencies used for building Calligra can be installed by running:

yum-builddep calligra

Arch Linux & Manjaro

All the dependencies used for building Calligra can be installed by running:

sudo pacman -Sy automoc4 git cmake make boost boost-build kdepimlibs eigen2 freetds kdegraphics-okular libgsf libwpd libwpg libwps pstoedit glew gsl cmake automoc4 boost libkdcraw libpqxx fftw opengtl lcms2 vc

Chakra

All the dependencies used for building Calligra can be installed by running:

sudo pacman -S kdelibs kdepimlibs eigen freetds kdegraphics-okular kdeedu-marble xbase libgsf libwpd libwpg libwps libvisio pstoedit glew gsl cmake automoc4 libspnav libqtgtl boost libkdcraw libpqxx fftw opengtl docbook-xsl create-resources lcms2 qrencode libdmtx

OS X

Latest effort of packaging Calligra in OS X is using Homebrew.

First, include the calligra tap to your homebrew system:

brew tap philacs/homebrew-calligra

If later you decide to remove the tap, use:

brew untap philacs/calligra

Then you can get list of required dependencies through:

brew deps --1 calligra

For optional dependencies, use:

brew info calligra

Install those dependencies through homebrew or manage them manually or through Macports.

If you want to use ninja instead of GNU make:

brew install ninja

Since KDE is not packaged in Homebrew and Calligra only depends on some features in kdelibs, we build a stripped kdelibs as Calligra's KDE dependency, this is the same to what is done on Windows platform.

First clone the kdelibs-stripped repo:

git clone git://anongit.kde.org/clones/kdelibs/rempt/kdelibs-stripped.git

We use the 'stripped' branch:

git checkout -b origin/stripped stripped

Create a build directory:

mkdir -p $HOME/kde4/build/kdelibs-stripped
cd $HOME/kde4/build/kdelibs-stripped

Under the build directory, build kdelibs:

cmake -DCMAKE_INSTALL_PREFIX=$HOME/kde4/inst -DCMAKE_PREFIX_PATH=/usr/local/opt/gettext <path to source code directory> (-GNinja if you use ninja instead of make)

make install (or ninja install)

Calligra still depends on Eigen 2, while Homebrew already upgraded to Eigen 3, so you have to install old version of eigen through Homebrew and pin it in that version, or compile your own eigen 2:

mkdir -p $HOME/kde4/build/eigen2
cd $HOME/kde4/build/eigen2
curl -LO http://bitbucket.org/eigen/eigen/get/2.0.17.tar.bz2
tar jvxf 2.0.17.tar.bz2

cmake -DCMAKE_INSTALL_PREFIX=$HOME/kde4/inst -DCMAKE_BUILD_TYPE=Release eigen-eigen-* (-GNinja if using ninja)

make install (or ninja install)

Build Calligra

Note

It is not possible to build Calligra in the source directory. Set up your directories as described in the Recommended setup section above

Type:

mkdir -p $HOME/kde4/build/calligra
mkdir -p $HOME/kde4/inst
cd $HOME/kde4/build/calligra

The next step depends on your Qt version: There is a bug in Qt 4.8.0 and 4.8.1 which crashes the textshape quite heavily. The bug is fixed in Qt 4.8.2. There is a patch available for both Qt 4.8.0 & Qt 4.8.1 and most distributions that ship Calligra have included the patch in their Qt, if those versions. See README.PACKAGERS for more information on the topic. So if your Qt is either 4.8.0 or 4.8.1 and it has the patch applied here is the cmake command you need to use so all gets build:

cmake -DCMAKE_INSTALL_PREFIX=$HOME/kde4/inst $HOME/kde4/src/calligra \
      -DCMAKE_BUILD_TYPE=RelWithDebInfo -DIHAVEPATCHEDQT=true

Otherwise, if your Qt is a different version or does not have the patch applied, type the command without the IHAVEPATCHEDQT flag:

cmake -DCMAKE_INSTALL_PREFIX=$HOME/kde4/inst $HOME/kde4/src/calligra \
      -DCMAKE_BUILD_TYPE=RelWithDebInfo

If you use OS X and followed previous steps about dependencies:

cmake -DPRODUCTSET=osx -DCMAKE_INSTALL_PREFIX=$HOME/kde4/inst -DCMAKE_PREFIX_PATH=/usr/local/opt/gettext (Homebrew gettext prefix) -DCMAKE_BUILD_TYPE:STRING=Debug -DQT_QTDBUS_DEFINITIONS=-DQT_NO_DBUS $HOME/kde4/src/calligra

cmakekde tool can be used as explained on the build instructions for KDE4.

Then type:

make

Note that on dual-core machines compilation can be greatly speed up with the -j parameter of the make program, for example for dual-core:

make -j3

and for quad-core:

make -j5

n cores -> -jn+1

Then type this command to install the software:

make install

Debugging options. The default debug setting is RelWithDebInfo which is suitable for most developers. If you are debugging an application and cannot trace the codew, you can set CMAKE_BUILD_TYPE to "DebugFull" to get a slower Calligra but with even more verbose debugging (backtrace) information. For this replace -DCMAKE_BUILD_TYPE=RelWithDebInfo in the above cmake command with -DCMAKE_BUILD_TYPE=DebugFull. However, all Calligra applications will crash on closing with this option enabled.

If you are working on Krita, use the KritaDevs option always.

Please follow the Running Calligra Applications instructions before trying to run an application.

Updating and Rebuilding

If the source code has been cloned using Git, it is possible to update the source code with newly added changes and build again. Usually only changing parts will be built, so this operation would be faster than building the source code from scratch.

Type:

cd $HOME/kde4/src/calligra
git pull --rebase
cd $HOME/kde4/build/calligra
make
make install

Note

make -j4 or make -j8 can be used instead of make to speedup the build on multicore machines

Building Selected Applications

Using Product Sets

By default, the build system tries to build all applications. The recommended way to change this is to specify a different product set by setting the PRODUCTSET CMake variable. The following table illustrates the predefined product sets.

Application	Product Set
Application	DESKTOP	CREATIVE	ACTIVE	OSX	ALL
Active			X		X
Author	X			X	X
Braindump	X			X	X
Flow	X			X	X
Karbon	X	X		X	X
Kexi	X				X
Krita	X	X		X	X
Plan	X				X
Sheets	X			X	X
Stage	X			X	X
Words	X			X	X

For example, to build the CREATIVE product set, pass

-DPRODUCTSET=CREATIVE

on the CMake command line.

Note

The set of included plugins, import/export filters and extra tools may differ between product sets. Consult the product set definitions in the cmake/productsets directory of the Calligra sources for detailed information about what is included in each product set.

Specific Product Sets

For convenience, specific cases have been covered by extra product sets.

Application	Product Set
Application	KEXI	KEXI+SHEETS
Active
Author
Braindump
Flow
Karbon
Kexi	X	X
Krita
Plan
Sheets		X
Stage
Words

Fine-grained Selection

Advanced users and developers wishing to disable certain applications or other products from the selected productset may do so by setting the corresponding BUILD_{application} variable to OFF. For example, to disable compilation of Krita and Karbon, you can pass

-DBUILD_krita=OFF -DBUILD_karbon=OFF

on the CMake command line. You can also do this using the ccmake tool included with CMake, which you may run after the initial CMake run but before you run make.

Note

Many components should not be disabled using BUILD_{something}. Set these variables with caution!

Instead of disabling products from the selected productset, it is also possible to design completely own productsets and then select one of them with the PRODUCTSET CMake variable. How to do that is described in the file README in the cmake/productsets directory of the Calligra sources.

Running Calligra Applications

After you installed them, there are two options to now make the Calligra applications available for running.

Running from Command Line

If you have installed Calligra in a different prefix than KDElibs (which iss recommended in this document), you have to set the following environment variables:

export KDEDIRS=/path/to/install:$KDEDIRS
export PATH=/path/to/install/bin:$PATH
export KDEHOME=/path/to/a/config/dir

And then you need to register all the Calligra internal plugins to the system, by executing:

kbuildsycoca4

For example for the recommended directory structure:

export KDEDIRS=$HOME/kde4/inst:$KDEDIRS
export PATH=$HOME/kde4/inst/bin:$PATH
export KDEHOME=$HOME/kde4/.kde

Note

It is important to set KDEHOME to a directory different of $HOME/.kde, and if the directory does not exist, it will be created automatically.

Running from Menus or Desktop Icons

Instead of using KDEDIRS, you can add these lines to $HOME/.kde/share/config/kdeglobals file using text editor:

[Directories]
prefixes=/path/to/install

And then you need to register all the Calligra internal plugins to the system, by executing:

kbuildsycoca4

The advantage of this is that KDE will always look for the services where Calligra is installed. For example for the recommended directory structure:

[Directories]
prefixes=$HOME/kde4/inst

Executing Unit Tests

To be able to execute unit tests, you need to explicitly enable them in the build configuration. To do so, set the KDE4_BUILD_TESTS variable to "ON", either by issuing the command in the build directory:

cd $HOME/kde4/build/calligra
cmake -DKDE4_BUILD_TESTS=ON .

Or you can run ccmake . in the buld directory and set KDE4_BUILD_TESTS to "on".

You can then run the test by executing:

make test

or individually in the tests directories.

It is recommended to execute

make install

before running tests.

CMake Build Options

When you enter your build directory, you can type "ccmake ." to see many build options, e.g. you can turn off compilation of apps you don't want - you can save time when compiling.

Here is list for Krita related options:

HAVE_MEMORY_LEAK_TRACKER [On/Off] - You can turn on compilation of the tool in krita which detects memory leak. If you want to help debug Krita memory usage, it is useful. Otherwise you just slow down your Krita.
HAVE_BACKTRACE_SUPPORT [On/Off] - It is related to the memory leak tool. If you activate, you will be able to see code path which leads to memory leak.

Resources

Possible Issues

If you get errors when running an application like:

krita(8565)/calligra (lib komain) KoPluginLoader::load: Loading plugin "Animation Tool" failed, 
"Cannot load library /home/michael/kde4/inst/lib/kde4/kpresentertoolanimation.so: 
(/home/michael/kde4/inst/lib/libkopageapp.so.7: undefined symbol:
_ZN28KoShapeContainerDefaultModel3addEP7KoShape)" ( 1 )

or crashes when starting an application, then you very likely have a version of Calligra installed through your package manager. As emphasized earlier in this document, you can only have one version of Calligra, and you should uninstall your packaged Calligra.

@@ Line 37: / Line 37: @@
 The latest stable Calligra version is '''{{Calligra/Stable}}'''.
-It can be downloaded as single archive file from http://download.kde.org/stable/calligra-latest/calligra-{{Calligra/Stable}}.tar.bz2
+It can be downloaded as single archive file from http://download.kde.org/stable/calligra-{{Calligra/Stable}}/calligra-{{Calligra/Stable}}.tar.xz
 If you prefer, stable versions are also available on the git repository too. To get stable version x.y from git, first clone the repository (''git clone kde:calligra'') and switch to ''calligra/x.y'' branch (that's the notation). Full procedure of cloning is available in the [[#Get the source code for the development version|Get the source code for the development version]] section below.