Jump to content

KDE PIM/KItinerary/Trenitalia Barcode: Difference between revisions

From KDE Community Wiki
Vkrause (talk | contribs)
Vkrause (talk | contribs)
Line 60: Line 60:
| 45:7 - 50:2 || 6 x 6 bit uint || "Codice CP" (CP code) || Each uint is a digit of the code
| 45:7 - 50:2 || 6 x 6 bit uint || "Codice CP" (CP code) || Each uint is a digit of the code
|-
|-
| 50:3 - 50:7 || ? || ||
| 50:3 - 50:7 || null || ||
|-
|-
| 51:0 - 55:7 57:7 || 0x0B 0x65 0x23 0x18 0x40 || || fixed in all samples?
| 51:0 - 51:3 || 0x0 or 0x8 || || 0x0 when seat reservation/PNR present, 0x8 otherwise
|-
|-
| 56:0 - 56:7 || 0xE5 or 0xE6 || ||
| 51:4 - 57:7 || 0xB 0x65 0x23 0x18 0x40 0xE5 0xC0 || || fixed in all samples
|-
| 57:0 - 57:7 || 0xC0 || || fixed in all samples?
|-
|-
| 58:0 - 58:3 || null || || might be part of the ticket number?
| 58:0 - 58:3 || null || || might be part of the ticket number?

Revision as of 16:13, 23 October 2019

General Observations

  • always 67 bytes
  • exactly for one passenger/leg
  • does not seem to contain signatures, checksums or compression, based on minimal bit pattern changes on adjacent tickets
  • a lot less null bytes when PNR/seat reservation are present (ie. highspeed train tickets?)
  • there is a unique, globally sequential ticket number, 2017 in the 600M range, 2019 in the 1B range, which suggests 32bit might be a bit short for this

Bit Layout

Byte:Bit (MSB) Content Meaning Notes
0:0 - 4:7 0x20 0x14 0xC2 0x08 0x10 fixed value in all samples, contains the Trenitalia UIC code ("83")
5:0 - 5:2 unknown
5:3 - 6:3 9 bit uint issue or travel day day since Jan 1st, issue day when PNR present, travel day otherwise
6:4 - 7:7 unknown varies between samples
8:0 - 10:0 null might be part of CartaFreccia?
10:1 - 13:4 CartaFreccia (trenitalia loyalty program)
13:5 - 14:3 100 xxxx 0000 for Italian stations codes (UIC 83.....), 0111 for international destination?
14:4 - 17:3 24 bit uint UIC station code of departure only for Italian destinations apparently
17:4 - 18:2 100 xxxx see above
18:3 - 21:2 24 bit uint UIC station code of arrival see above
21:3 - 22:1 unknown 22:1 seems 0 in all samples, the rest varies
22:2 - 24:1 16 bit uint train number could be as little as 14 bits too, no train number > 16k has been observed
24:3 - 29:7 null
30:0 - 30:5 unknown null if no PNR present, content unknown
30:6 - 31:1 4 bit uint coach number?
31:2 - 32:0 7 bit uint seat number seat row for trains with an airplane-like numbering scheme
32:1 - 32:2 null
32:3 - 32:6 4 bit uint seat column as hex number 0 for trains without an airplane-like numbering scheme
32:7 - 33:6 null?
33:6 - 38:2 6x6 bit as listed below PNR all null if ticket has no PNR, values map to digits/letters as follows: 0-9 -> 0-9, 10-35 -> A-Z
38:3 -43:3 null
43:4 - 44:2 1010 011 or null issuer or carrier UIC code only set if PNR is present, "83" for Trenitalia tickets otherwise, a few preceding bits are likely part of this fields as well
44:3 -45:6 null
45:7 - 50:2 6 x 6 bit uint "Codice CP" (CP code) Each uint is a digit of the code
50:3 - 50:7 null
51:0 - 51:3 0x0 or 0x8 0x0 when seat reservation/PNR present, 0x8 otherwise
51:4 - 57:7 0xB 0x65 0x23 0x18 0x40 0xE5 0xC0 fixed in all samples
58:0 - 58:3 null might be part of the ticket number?
58:4 - 62:3 32 bit uint ticket number
63:4 - 65:6 null
65:7 - 66:7 varies between samples, same as 6:4 - 7:3 same as 5:3 - 6:3 (days since Jan 1st)?

Open Questions

  • there is one sample where the departure and arrival UIC station codes are equal, contrary to what's in the corresponding PDF
  • for international destinations the station code does not actually seem to be a valid UIC station code, but there is only one sample to back this up so far
  • It seems plausible that the coach number is also encoded given the seat number is, 30:0 - 31:1 would seem like the obvious range. In the sample data this does not seem the case with any obvious encoding (In my 6 tickets, the 4 bits [30:6 - 31:1] correspond to the coach number, but that might be a coincidence. Drdanz (talk))
  • Is the train type derived from the train number, or is that also encoded? 21:3 -22:1 would seem to be the obvious range for that, but so far no correlation to current samples found.
  • Is the class encoded somewhere? (could be [30:4 - 30:5]? or maybe [56:5 56:5]?). From 2 tickets, same route, same hour, same day, different "0ffer - Service" (ECONOMY-1a Class vs BASE-2a Class) comparing the two barcodes, after extracting all known information, the only unknown bits in different bytes are: [7:1 - 7:7] (1st class 0001000, 2nd class 0101000) and [66:0 66:7] (1st class 11110101, 2nd class 11111001), perhaps [66:4 - 66:5]?
  • Date/time encoding is still a mystery. (In my tickets for the same route in different consecutive days, the only different bytes are [31,32] (Seat + null), [47,48,50] (CP Code + null) and [62] (Ticket number + null), meaning that the date might not be there, or be encoded in the CP Code. In return tickets for the same route also [15,16,17] (UIC station code of departure + 100 xxxx), [19,20,21] (UIC station code of arrival + *unknown*), and [23,24] (Train number + null) are different, therefore the remaining information can be encoded only in [21:3 - 21:7], which for all my ticket correspond to the departure time hour, but I couldn't find the minutes anywhere and it could be a coincidence Drdanz (talk)). (On a different sample this field is the departure time hour+1, perhaps departure time h? if minutes <= 30; departure time +1 if minutes > 30 Drdanz (talk))
  • What is the "CP Code" (Encoded in 45:7 - 50:2): Last digit (or 2 digits) might be an incremental number in digits in the same purchase