Frameworks/Epics/KF5.0 Release Preparation/l10n: Difference between revisions

Latest revision as of 13:14, 13 May 2014

Common tasks

Status	Task	Coordination
DONE	Decide where to place Messages.sh. Answer: src/ by default
DONE	Check the release scripts to ensure they include the .po or .ts files as well as the matching CMake code to build and install them.
DONE	Get scripty to run on l10n-kf5

KI18n-based frameworks

Framework list:

frameworkintegration
kactivities
kcmutils
kconfigwidgets
kdeclarative
kdelibs4support
kdesu
kdoctools (Only if SIMPLE_XSLT is not defined => Should we care?)
kfileaudiopreview
khtml
ki18n
kiconthemes
kinit
kio
kjsembed
knewstuff
knotifyconfig
kparts
kpty
kross
kservice
ktexteditor
ktextwidgets
kunitconversion
kwallet
kxmlgui
plasma-framework

Status

Status	Task	Coordination
DONE	Add src/Messages.sh scripts
DONE	Review existing Messages.sh scripts. Check for wrong names such as catalogs with '4' suffix, or catalogs whose name would clash with an existing KDE4 library.
DONE	Make sure translations are loaded, meaning TRANSLATION_DOMAIN is set. This could be done as a -D switch by the build system.
DONE	- kdeclarative: -DTRANSLATION_DOMAIN conflicts with RootContext::i18n.
DONE	- kross: -DTRANSLATION_DOMAIN conflicts with TranslationModule::i18n.
DONE	- ktexteditor: -DTRANSLATION_DOMAIN conflicts with i18n() in katescripthelpers.cpp.
DONE	Create cmake functions to simplify translation integration. https://git.reviewboard.kde.org/r/117804/ https://git.reviewboard.kde.org/r/117805/
DONE	kdeclarative: Find a way to get qml code translated (only two strings so far).
DONE	Fix calls to kde4_install_ts_files in trunk/l10n-kf5/scripts/autogen.sh
DONE	Fix support for multiple .po files named the same https://git.reviewboard.kde.org/r/117997/
DONE	Fix support for multiple .docbook files named the same https://git.reviewboard.kde.org/r/118004/
DONE	Integrate translation compilation code (depends on support for multiple .po and .docbook files)

Qt-based frameworks

Framework list:

kauth
kbookmarks
kcodecs
kcompletion
kcoreaddons
kdbusaddons
kdesignerplugin
kdnssd
kglobalaccel
kitemviews
kjobwidgets
knotifications
kwidgetsaddons
kwindowsystem
solid
sonnet

Status

Status	Task	Coordination
DONE	Define the way to extract translations for Qt-based frameworks.
DONE	Investigate whether it is possible to have Qt-based frameworks automatically load their transitions. Answer: yes, via a Qt macro.
DONE	Add src/Messages.sh script
DONE	Check QObject::tr is correctly used
DONE	Define the way to integrate compilation of translations in build system. Done: new function added to ECM: ecm_create_qm_from_po_files()
DONE	Integrate translation compilation code
DONE	Update framework template
DONE	Extract strings from .ui files
DONE	solid: fix string extraction: it uses $XGETTEXT and $XGETTEXT_QT
DONE	kwidgetsaddons: Check data for KCharSelectData is marked as translatable. See FIXME in the code
DONE	kcoreaddons: check src/mimetypes/XmlMessages.sh. Check it still works and add a "5" suffix to the .po file
DONE	Adjust ECM qm handling code to work with trunk/l10n-kf5 workflow. https://git.reviewboard.kde.org/r/117560/
DONE	Add a "_qt" suffix to the catalog names
DONE	l10n-kf5: Modify scripts/autogen.sh to create different CMake code depending on whether the .po file must be compiled into a .qm or into a .mo. A .po which must be compiled into a .qm if its catalog name ends with "_qt"
DONE	Figure out the best way to handle plural forms: right now Qt requires the creation of a plural-only .qm file for english.

@@ Line 1: / Line 1: @@
-== TODO ==
+== Common tasks ==
-For each framework the following needs to be done:
-=== Mark strings translatable ===
+{| class="sortable" border="1" cellpadding="5" cellspacing="0" style="border: gray solid 1px; border-collapse: collapse; text-align: left; width:100%;"
-Make sure all strings that need to be translated are either wrapped by i18n*() or tr*() depending on the translation API of choice.
+|- style="background: #ececec; white-space:nowrap;"
+! Status
+! Task
+! Coordination
+{{FeatureDone | Decide where to place Messages.sh. Answer: src/ by default | }}
+{{FeatureDone | Check the release scripts to ensure they include the .po or .ts files as well as the matching CMake code to build and install them. | }}
+{{FeatureDone | Get scripty to run on l10n-kf5 | }}
+|}
+== KI18n-based frameworks ==
+Framework list:
-=== Extract translatable strings ===
+* frameworkintegration
-If there is no Messages.sh file in the repository, create a src/Messages.sh file. See http://techbase.kde.org/Development/Tutorials/Localization/i18n_Build_Systems#handling_i18n_in_KDE.27s_subversion_repository for details on how to create and test it.
+* kactivities
+* kcmutils
+* kconfigwidgets
+* kdeclarative
+* kdelibs4support
+* kdesu
+* kdoctools (Only if SIMPLE_XSLT is not defined => Should we care?)
+* kfileaudiopreview
+* khtml
+* ki18n
+* kiconthemes
+* kinit
+* kio
+* kjsembed
+* knewstuff
+* knotifyconfig
+* kparts
+* kpty
+* kross
+* kservice
+* ktexteditor
+* ktextwidgets
+* kunitconversion
+* kwallet
+* kxmlgui
+* plasma-framework
-If there are Messages.sh files, check they are still relevant.
+=== Status ===
-Things to test:
+{| class="sortable" border="1" cellpadding="5" cellspacing="0" style="border: gray solid 1px; border-collapse: collapse; text-align: left; width:100%;"
-* Make sure the Messages.sh files extract all the files
+|- style="background: #ececec; white-space:nowrap;"
-* Make sure the Messages.sh files create catalogs with correct names. Look out for catalogs with '4' suffix, or catalogs whose name would clash with an existing KDE4 library.
+! Status
+! Task
+! Coordination
+{{ FeatureDone | Add src/Messages.sh scripts | }}
+{{ FeatureDone | Review existing Messages.sh scripts. Check for wrong names such as catalogs with '4' suffix, or catalogs whose name would clash with an existing KDE4 library. | }}
+{{ FeatureDone | Make sure translations are loaded, meaning TRANSLATION_DOMAIN is set. This could be done as a -D switch by the build system. | }}
+{{ FeatureDone |- kdeclarative: -DTRANSLATION_DOMAIN conflicts with RootContext::i18n. | }}
+{{ FeatureDone |- kross: -DTRANSLATION_DOMAIN conflicts with TranslationModule::i18n. | }}
+{{ FeatureDone |- ktexteditor: -DTRANSLATION_DOMAIN conflicts with i18n() in katescripthelpers.cpp. | }}
+{{ FeatureDone | Create cmake functions to simplify translation integration. https://git.reviewboard.kde.org/r/117804/ https://git.reviewboard.kde.org/r/117805/ | }}
+{{ FeatureDone | kdeclarative: Find a way to get qml code translated (only two strings so far). | }}
+{{ FeatureDone | Fix calls to kde4_install_ts_files in trunk/l10n-kf5/scripts/autogen.sh | }}
+{{ FeatureDone | Fix support for multiple .po files named the same https://git.reviewboard.kde.org/r/117997/ | }}
+{{ FeatureDone | Fix support for multiple .docbook files named the same https://git.reviewboard.kde.org/r/118004/ | }}
+{{ FeatureDone | Integrate translation compilation code (depends on support for multiple .po and .docbook files) | }}
+|}
-=== Make sure translations are loaded ===
+== Qt-based frameworks ==
-If using ki18n, make sure it follows http://api.kde.org/frameworks-api/frameworks5-apidocs/ki18n/html/prg_guide.html#link_lib . In short: Check all files with calls to i18n*() define TRANSLATION_DOMAIN '''before''' including KLocalizedString.
-If using tr() ... no clue, someone should care about this. Probably have a look at how Trojita does it for Qt4 and try to generalize for KF5
+Framework list:
-=== Make sure translations are shipped ===
+* kauth
-Check the release scripts to ensure they include the .po or .ts files as well as the matching CMake code to build and install them.
+* kbookmarks
+* kcodecs
+* kcompletion
+* kcoreaddons
+* kdbusaddons
+* kdesignerplugin
+* kdnssd
+* kglobalaccel
+* kitemviews
+* kjobwidgets
+* knotifications
+* kwidgetsaddons
+* kwindowsystem
+* solid
+* sonnet
-== Status ==
+=== Status ===
 {| class="sortable" border="1" cellpadding="5" cellspacing="0" style="border: gray solid 1px; border-collapse: collapse; text-align: left; width:100%;"
 |- style="background: #ececec; white-space:nowrap;"
 ! Status
-! Framework (Translation API)
+! Task
 ! Coordination
-{{FeatureDone | attica (-) | }}
+{{ FeatureDone | Define the way to extract translations for Qt-based frameworks. | }}
-{{FeatureDone | KI18n (-) | }}
+{{ FeatureDone | Investigate whether it is possible to have Qt-based frameworks automatically load their transitions. Answer: yes, via a Qt macro. | }}
-{{FeatureTodo | kactivities (KI18n) | }}
+{{ FeatureDone | Add src/Messages.sh script | }}
-{{FeatureDone | karchive (-) | }}
+{{ FeatureDone | Check QObject::tr is correctly used | }}
-{{FeatureTodo | kauth (Qt) | }}
+{{ FeatureDone | Define the way to integrate compilation of translations in build system. Done: new function added to ECM: ecm_create_qm_from_po_files() | }}
-{{FeatureTodo | kbookmarks (Qt) | }}
+{{ FeatureDone | Integrate translation compilation code | }}
-{{FeatureTodo | kcmutils (KI18n) | }}
+{{ FeatureDone | Update framework template | }}
-{{FeatureTodo | kcodecs (Qt) | }}
+{{ FeatureDone | Extract strings from .ui files| }}
-{{FeatureTodo | kcompletion (Qt) | }}
+{{ FeatureDone | solid: fix string extraction: it uses $XGETTEXT and $XGETTEXT_QT | }}
-{{FeatureTodo | kconfig (KI18n) | }}
+{{ FeatureDone | kwidgetsaddons: Check data for KCharSelectData is marked as translatable. See FIXME in the code | }}
-{{FeatureTodo | kconfigwidgets (KI18n) | }}
+{{ FeatureDone | kcoreaddons: check src/mimetypes/XmlMessages.sh. Check it still works and add a "5" suffix to the .po file | }}
-{{FeatureTodo | kcoreaddons (Qt) | }}
+{{ FeatureDone | Adjust ECM qm handling code to work with trunk/l10n-kf5 workflow. https://git.reviewboard.kde.org/r/117560/| }}
-{{FeatureTodo | kcrash (Qt) | }}
+{{ FeatureDone | Add a "_qt" suffix to the catalog names | }}
-{{FeatureTodo | kdbusaddons (Qt) | }}
+{{ FeatureDone | l10n-kf5: Modify scripts/autogen.sh to create different CMake code depending on whether the .po file must be compiled into a .qm or into a .mo. A .po which must be compiled into a .qm if its catalog name ends with "_qt" | }}
-{{FeatureTodo | kde4support (KI18n) | }}
+{{ FeatureDone | Figure out the best way to handle plural forms: right now Qt requires the creation of a plural-only .qm file for english. | }}
-{{FeatureDone | kdeclarative (-) | }}
-{{FeatureDone | kded (-) | }}
-{{FeatureTodo | kdesignerplugin (Qt) | }}
-{{FeatureDone | kdesu (-) | }}
-{{FeatureDone | kdewebkit (-) | }}
-{{FeatureTodo | kdnssd-framework (Qt) | }}
-{{FeatureTodo | kdoctools (KI18n) | }}
-{{FeatureDone | kemoticons (-) | }}
-{{FeatureDone | kf5umbrella (-) | }}
-{{FeatureTodo | kfileaudiopreview (KI18n) | }}
-{{FeatureTodo | kglobalaccel (Qt) | }}
-{{FeatureDone | kguiaddons (-) | }}
-{{FeatureTodo | khtml (KI18n) | }}
-{{FeatureTodo | ki18n (KI18n) | }}
-{{FeatureTodo | kiconthemes (KI18n) | }}
-{{FeatureDone | kidletime (-) | }}
-{{FeatureDone | kimageformats (-) | }}
-{{FeatureTodo | kinit (KI18n) | }}
-{{FeatureTodo | kio (KI18n) | }}
-{{FeatureDone | kitemmodels (-) | }}
-{{FeatureTodo | kitemviews (Qt) | }}
-{{FeatureTodo | kjobwidgets (Qt) | }}
-{{FeatureDone | kjs (-) | }}
-{{FeatureTodo | kjsembed (KI18n) | }}
-{{FeatureDone | kmediaplayer (-) | }}
-{{FeatureTodo | knewstuff (KI18n) | }}
-{{FeatureTodo | knotifications (Qt) | }}
-{{FeatureTodo | knotifyconfig (KI18n) | }}
-{{FeatureTodo | kparts (KI18n) | }}
-{{FeatureDone | kplotting (-) | }}
-{{FeatureTodo | kprintutils (KI18n) | }}
-{{FeatureTodo | kpty (KI18n) | }}
-{{FeatureTodo | kross (KI18n) | }}
-{{FeatureTodo | krunner (KI18n) | }}
-{{FeatureTodo | kservice (KI18n) | }}
-{{FeatureTodo | ktexteditor (KI18n) | }}
-{{FeatureTodo | ktextwidgets (KI18n) | }}
-{{FeatureTodo | kunitconversion (KI18n) | }}
-{{FeatureTodo | kwallet (KI18n) | }}
-{{FeatureTodo | kwidgetsaddons (Qt) | }}
-{{FeatureTodo | kwindowsystem (KI18n) | }}
-{{FeatureTodo | kxmlgui (KI18n) | }}
-{{FeatureTodo | plasma-framework (KI18n) | }}
-{{FeatureTodo | solid (Qt) | }}
-{{FeatureTodo | sonnet (Qt) | }}
-{{FeatureDone | threadweaver (-) | }}
 |}