Jump to content

Guidelines and HOWTOs/Debugging/Debugging with GDB: Difference between revisions

From KDE Community Wiki
Nmariusp (talk | contribs)
m Output from modern gdb
Mention introductory video for gdb/debugging with good iterative teaching
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
{{Review|Outdated info. Port to KF5}}
This is a short tutorial on debugging KDE applications. Throughout this
This is a short tutorial on debugging KDE applications. Throughout this
tutorial I will use "kwrite" as an example application.
tutorial I will use "kwrite" as an example application.
If you would like to learn more about using gdb and each step shown here, the video [https://www.youtube.com/watch?v=YzIBwqWC6EM CppCon 2022 Back to Basics: Debugging] by Mike Shah serves as a good introduction.


==Debugging with GDB==
==Debugging with GDB==
Line 114: Line 114:
(gdb)
(gdb)
</pre>
</pre>
{{Note|
Important: many applications use "KUniqueApplication" to ensure that only one instance can exist at a given time in a given KDE session. This is the case for kwin, kontact, konsole, plasma, etc. To debug those applications, attach to them while they're running (see next section) or use <tt>set args --nofork</tt>
}}


==Attaching gdb to already running applications==
==Attaching gdb to already running applications==
Line 123: Line 119:
Sometimes it is not practical to start an application from within gdb.
Sometimes it is not practical to start an application from within gdb.
E.g. in those cases where you didn't know the application was about to
E.g. in those cases where you didn't know the application was about to
crash :-) When you get the friendly DrKonqi dialog informing you about
crash and you get the friendly DrKonqi dialog informing you about
a crash you are just in time to start your debugger.
a crash. At that point, you are just in time to start your debugger.


First lets attach gdb to an application that hasn't crashed (yet).
First lets attach gdb to an application that hasn't crashed (yet).


You start with finding the process of the application with e.g. <tt>ps -aux</tt>:
You start with finding the process of the application with e.g. <tt>ps aux</tt>:


<pre>
<pre>
> ps -aux | grep kedit
$ ps aux | grep kwrite
bastian 21570 15.1 6.8 13740 8800 pts/6    S    15:34   0:01 kedit
n  175939 0.9 0.4 1948832 134148 pts/8  Sl  04:00   0:00 kwrite myfile.txt
bastian 21582 0.0  0.3 1132  412 pts/6   R    15:34   0:00 grep kedit
n 176073 0.0  0.0  9076 2172 pts/8   S+  04:01   0:00 grep --color=auto kwrite
</pre>
</pre>


From this you learn that kedit has process id 21570. Now you can start gdb as
From this you learn that kwrite has process id 175939. Now you can start gdb as
follows:
follows:


<pre>
<pre>
> gdb kedit 21570
$ gdb kwrite 175939
GNU gdb 4.95.0
GNU gdb (GDB) 12.0.90.20220320-git
Copyright 2000 Free Software Foundation, Inc.
Copyright (C) 2022 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
welcome to change it and/or distribute copies of it under certain conditions.
This is free software: you are free to change and redistribute it.
Type "show copying" to see the conditions.
There is NO WARRANTY, to the extent permitted by law.
There is absolutely no warranty for GDB.  Type "show warranty" for details.
Type "show copying" and "show warranty" for details.
This GDB was configured as "i686-pc-linux-gnu"...
This GDB was configured as "x86_64-pc-linux-gnu".
/home1/bastian/21570: No such file or directory.
Type "show configuration" for configuration details.
Attaching to program: /ext/kde2.0/bin/kedit, Pid 21570
For bug reporting instructions, please see:
Reading symbols from /ext/kde2.0/lib/kedit.so.0...done.
<https://www.gnu.org/software/gdb/bugs/>.
Loaded symbols for /ext/kde2.0/lib/kedit.so.0
Find the GDB manual and other documentation resources online at:
    <http://www.gnu.org/software/gdb/documentation/>.
 
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from kwrite...
Attaching to program: /home/n/kde/usr/bin/kwrite, process 175939
[New LWP 175940]
...
...
Reading symbols from /lib/ld-linux.so.2...done.
[New LWP 175996]
Loaded symbols for /lib/ld-linux.so.2
[Thread debugging using libthread_db enabled]
Reading symbols from /lib/libnss_compat.so.2...done.
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Loaded symbols for /lib/libnss_compat.so.2
0x00007fcb25abad7f in poll () from /lib/x86_64-linux-gnu/libc.so.6
Reading symbols from /lib/libnsl.so.1...done.
Loaded symbols for /lib/libnsl.so.1
0x40c3d88e in __select () from /lib/libc.so.6
(gdb)
(gdb)
</pre>
</pre>


You will usually end up in the middle of a select() call from the event-loop.
You will usually end up in the middle of a poll() call from the event-loop.
This is the place where a KDE application spends most of its time, waiting
This is the place where a KDE application with graphical user interface (GUI app) spends most of its time, waiting for things to happen.
for things to happen.


A backtrace will typically look something like this:
A backtrace will typically look something like this:
Line 171: Line 170:
<pre>
<pre>
(gdb) bt
(gdb) bt
#0  0x40c3d88e in __select () from /lib/libc.so.6
#0  0x00007fcb25abad7f in poll () from /lib/x86_64-linux-gnu/libc.so.6
#1  0x40a22844 in __DTOR_END__ () at fam.c++:356
#1  0x00007fcb238d5696 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#2  0x407293bf in QApplication::enter_loop (this=0xbffff6e8)
#2  0x00007fcb2387e3c3 in g_main_context_iteration () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
    at kernel/qapplication.cpp:2552
#3  0x00007fcb261090a8 in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /lib/x86_64-linux-gnu/libQt5Core.so.5
#3  0x406b1d7b in QApplication::exec (this=0xbffff6e8)
#4  0x00007fcb260ae74b in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /lib/x86_64-linux-gnu/libQt5Core.so.5
    at kernel/qapplication_x11.cpp:2217
#5  0x00007fcb260b6ce4 in QCoreApplication::exec() () from /lib/x86_64-linux-gnu/libQt5Core.so.5
#4  0x4002d500 in main (argc=1, argv=0xbffff854) at kedit.cpp:1662
#6  0x000056310e5abc06 in main (argc=2, argv=0x7fffd12fdaf8) at /home/n/kde/src/utilities/kate/apps/kwrite/main.cpp:194
#5  0x40bbba5e in __libc_start_main (main=0x8048568 &lt;main&gt;, argc=1,
    argv=0xbffff854, init=0x8048514 &lt;_init&gt;, fini=0x80486cc &lt;_fini&gt;,
    rtld_fini=0x4000aa20 &lt;_dl_fini&gt;, stack_end=0xbffff84c)
    at ../sysdeps/generic/libc-start.c:92
(gdb)
(gdb)
</pre>
</pre>
Line 187: Line 182:
==Debugging core files with GDB==
==Debugging core files with GDB==


Debugging process requires much memory. If you have to inspect crash, you can debug core files. It's much faster and requires less memory. First limit the maximum size of core files and run the application:
If you have to inspect a crash, you can debug core files.
E.g. generate a core file:
 
<pre>
<pre>
ulimit -c 100000
$ ulimit -c 100000
kedit --nocrashhandler
$ ulimit -a
core file size              (blocks, -c) 100000
$ # E.g. sudo sysctl -w kernel.core_pattern=core.%u.%p.%t # to enable core generation
$ # E.g. cat /proc/sys/kernel/core_pattern
core.%u.%p.%t
$ KCRASH_DUMP_ONLY=1 kwrite&
$ killall -SEGV kwrite
[1]+  Segmentation fault      (core dumped) KCRASH_DUMP_ONLY=1 kwrite
$ ls
core.1001.178247.1653874173
</pre>
</pre>
Do not forget to use <tt>--nocrashhandler</tt> option. Core file would be created if the application crashed, so you can use gdb with created core file:
 
You can use gdb with the core file:
 
<pre>
<pre>
gdb kedit ./core-file #in my system it is core.PID
gdb kwrite ./core.1001.178247.1653874173
GNU gdb (GDB) 12.0.90.20220320-git
...
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `kwrite'.
Program terminated with signal SIGSEGV, Segmentation fault.
 
#0  0x00007f250647fd7f in poll () from /lib/x86_64-linux-gnu/libc.so.6
[Current thread is 1 (Thread 0x7f2500e1ce80 (LWP 178247))]
(gdb)
</pre>
</pre>


==Improving your gdb experience for KDE/Qt applications==
==Improving your gdb experience for KDE/Qt applications==
{{Warning|[[KDE/FAQs/Debugging FAQ#How do I print a QString in gdb?]] refers to ''different'' GDB scripts, in [https://invent.kde.org/sdk/kde-dev-scripts/ sdk/kde-dev-scripts]}}


Since version 7 GDB supports Python scripting for pretty printers. There are such scripts for basic Qt types (QString, QList, QMap, QHash, QDateTime and many others) in [https://invent.kde.org/kdevelop/kdevelop/-/tree/master/plugins/gdb/printers KDevelop git repository]. Download the scripts and add following lines to your ~/.gdbinit to load the scripts automatically as start:
By default GDB cannot pretty print basic Qt types (e.g. QString):
 
<pre>
$ gdb kwrite
GNU gdb (GDB) 12.0.90.20220320-git
...
Reading symbols from kwrite...
(gdb) break KAboutData::KAboutData
Breakpoint 1 at 0x2570
(gdb) run
Starting program: /home/n/kde/usr/bin/kwrite
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7ffff0787640 (LWP 180173)]
[New Thread 0x7fffef3bd640 (LWP 180174)]
 
Thread 1 "kwrite" hit Breakpoint 1, 0x0000555555556570 in KAboutData::KAboutData(QString const&, QString const&, QString const&, QString const&, KAboutLicense::LicenseKey, QString const&, QString const&, QString const&, QString const&)@plt ()
(gdb) step
Single stepping until exit from function _ZN10KAboutDataC1ERK7QStringS2_S2_S2_N13KAboutLicense10LicenseKeyES2_S2_S2_S2_@plt,
which has no line number information.
KAboutData::KAboutData (this=0x555555559b40 <main::{lambda()#2}::operator()() const::qstring_literal>, _componentName=..., _displayName=..., _version=..., _shortDescription=..., licenseType=KAboutLicense::Unknown, _copyrightStatement=..., text=..., homePageAddress=..., bugAddress=...) at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507    KAboutData::KAboutData(const QString &_componentName,
(gdb) step
 
Thread 1 "kwrite" hit Breakpoint 1, KAboutData::KAboutData (this=0x7fffffffd9e0, _componentName=..., _displayName=..., _version=..., _shortDescription=..., licenseType=KAboutLicense::LGPL, _copyrightStatement=..., text=..., homePageAddress=..., bugAddress=...) at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507    KAboutData::KAboutData(const QString &_componentName,
</pre>
 
Since version 7 GDB supports Python scripting for pretty printers. There are such scripts for basic Qt types (QString, QList, QMap, QHash, QDateTime and many others) in [https://invent.kde.org/kdevelop/kdevelop/-/tree/master/plugins/gdb/printers KDevelop git repository]. Download this directory and add following lines to your ~/.gdbinit to load the scripts automatically at gdb start:
 
<pre>
<pre>
python
$ cat ~/.gdbinit
import sys
python
sys.path.insert(0, '/folder/where/you/downloaded/the/scripts')
import sys
from qt import register_qt_printers
sys.path.insert(0, '/home/n/.local/misc/kdevelop-plugins-gdb-printers')
from kde import register_kde_printers
from qt import register_qt_printers
from kde import register_kde_printers
 
register_qt_printers (None)
register_kde_printers (None)
end
 
set print pretty on
</pre>


register_qt_printers (None)
Run gdb:
register_kde_printers (None)
end


set print pretty on
<pre>
$ gdb kwrite
GNU gdb (GDB) 12.0.90.20220320-git
...
Reading symbols from kwrite...
(gdb) break KAboutData::KAboutData
Breakpoint 1 at 0x2570
(gdb) run
Starting program: /home/n/kde/usr/bin/kwrite
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7ffff0787640 (LWP 179991)]
[New Thread 0x7fffef3bd640 (LWP 179992)]
 
Thread 1 "kwrite" hit Breakpoint 1, 0x0000555555556570 in KAboutData::KAboutData(QString const&, QString const&, QString const&, QString const&, KAboutLicense::LicenseKey, QString const&, QString const&, QString const&, QString const&)@plt ()
(gdb) step
Single stepping until exit from function _ZN10KAboutDataC1ERK7QStringS2_S2_S2_N13KAboutLicense10LicenseKeyES2_S2_S2_S2_@plt,
which has no line number information.
KAboutData::KAboutData (this=0x555555559b40 <main::{lambda()#2}::operator()() const::qstring_literal>, _componentName="", _displayName="", _version="", _shortDescription="", licenseType=KAboutLicense::Unknown, _copyrightStatement="", text="", homePageAddress="", bugAddress="") at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507    KAboutData::KAboutData(const QString &_componentName,
(gdb) step
 
Thread 1 "kwrite" hit Breakpoint 1, KAboutData::KAboutData (this=0x7fffffffd9e0, _componentName="kwrite", _displayName="KWrite", _version="22.07.70", _shortDescription="KWrite - Text Editor", licenseType=KAboutLicense::LGPL, _copyrightStatement="(c) 2000-2022 The Kate Authors", text="<img height=\"362\" width=\"512\" src=\":/kate/mascot.png\"/>", homePageAddress="https://kate-editor.org", bugAddress="[email protected]") at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507    KAboutData::KAboutData(const QString &_componentName,
(gdb)
</pre>
</pre>

Revision as of 15:54, 3 February 2024

This is a short tutorial on debugging KDE applications. Throughout this tutorial I will use "kwrite" as an example application.

If you would like to learn more about using gdb and each step shown here, the video CppCon 2022 Back to Basics: Debugging by Mike Shah serves as a good introduction.

Debugging with GDB

There are three ways to debug an application with gdb:

  1. You can start the application from within gdb.
  2. You can attach gdb to an already running application.
  3. You can run gdb after an application has crashed using a core file.

Starting applications from within gdb

To start an application with gdb you can start gdb as follows:

$ gdb kwrite
GNU gdb (GDB) 12.0.90.20220320-git
Copyright (C) 2022 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
    <http://www.gnu.org/software/gdb/documentation/>.

For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from kwrite...
(gdb)

You can now set the command line arguments that you want to pass to kwrite with the gdb command "set args":

(gdb) set args myfile.txt
(gdb)

gdb has loaded the kwrite executable on startup but it hasn't loaded any of the libraries yet. This means that you can't set any breakpoints in the libraries yet. The easiest way to do that is to set a breakpoint in the first line of main and then start the program:

(gdb) break main
Breakpoint 1 at 0x2ee6: file /home/n/kde/src/utilities/kate/apps/kwrite/main.cpp, line 26.
(gdb) run
Starting program: /home/n/kde/usr/bin/kwrite myfile.txt
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".

Breakpoint 1, main (argc=2, argv=0x7fffffffdcc8) at /home/n/kde/src/utilities/kate/apps/kwrite/main.cpp:26
26      {
(gdb) 

You can now set breakpoints everywhere. For example lets set a breakpoint in the KAboutData constructor.

(gdb) break KAboutData::KAboutData
Breakpoint 2 at 0x555555556570 (8 locations)
(gdb)

We can now continue the execution of kwrite. Execution will stop when it hits a breakpoint or when the program exits. In this case execution will stop in the first line of the KAboutData constructor:

(gdb) continue
Continuing.
[New Thread 0x7ffff0787640 (LWP 174356)]
[New Thread 0x7fffef3bd640 (LWP 174357)]

Thread 1 "kwrite" hit Breakpoint 2, 0x0000555555556570 in KAboutData::KAboutData(QString const&, QString const&, QString const&, QString const&, KAboutLicense::LicenseKey, QString const&, QString const&, QString const&, QString const&)@plt ()
(gdb)

You can set a breakpoint on a given source code line. An external editor is of great use at this point. With the list command we can select the source file we are interested in and verify that we have found the correct source line:

(gdb) list main.cpp:200
file: "/home/n/kde/src/frameworks/ki18n/src/i18n/main.cpp", line number: 200, symbol: "???"
Line number 195 out of range; /home/n/kde/src/frameworks/ki18n/src/i18n/main.cpp has 77 lines.
(gdb) list /home/n/kde/src/utilities/kate/apps/kwrite/main.cpp:115
110         /**
111          * bugzilla
112          */
113         aboutData.setProductName(QByteArray("kate/kwrite"));
114
115         /**
116          * set and register app about data
117          */
118         KAboutData::setApplicationData(aboutData);
119
(gdb) break 118
Breakpoint 2 at 0x55555555732b: file /home/n/kde/src/utilities/kate/apps/kwrite/main.cpp, line 118.
(gdb) continue
Continuing.

Thread 1 "kwrite" hit Breakpoint 2, main (argc=1, argv=0x7fffffffdce8) at /home/n/kde/src/utilities/kate/apps/kwrite/main.cpp:118
118         KAboutData::setApplicationData(aboutData);
(gdb)

Attaching gdb to already running applications

Sometimes it is not practical to start an application from within gdb. E.g. in those cases where you didn't know the application was about to crash and you get the friendly DrKonqi dialog informing you about a crash. At that point, you are just in time to start your debugger.

First lets attach gdb to an application that hasn't crashed (yet).

You start with finding the process of the application with e.g. ps aux:

$ ps aux | grep kwrite
n  175939  0.9  0.4 1948832 134148 pts/8  Sl   04:00   0:00 kwrite myfile.txt
n  176073  0.0  0.0   9076  2172 pts/8    S+   04:01   0:00 grep --color=auto kwrite

From this you learn that kwrite has process id 175939. Now you can start gdb as follows:

$ gdb kwrite 175939
GNU gdb (GDB) 12.0.90.20220320-git
Copyright (C) 2022 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<https://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
    <http://www.gnu.org/software/gdb/documentation/>.

For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from kwrite...
Attaching to program: /home/n/kde/usr/bin/kwrite, process 175939
[New LWP 175940]
...
[New LWP 175996]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
0x00007fcb25abad7f in poll () from /lib/x86_64-linux-gnu/libc.so.6
(gdb)

You will usually end up in the middle of a poll() call from the event-loop. This is the place where a KDE application with graphical user interface (GUI app) spends most of its time, waiting for things to happen.

A backtrace will typically look something like this:

(gdb) bt
#0  0x00007fcb25abad7f in poll () from /lib/x86_64-linux-gnu/libc.so.6
#1  0x00007fcb238d5696 in ?? () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#2  0x00007fcb2387e3c3 in g_main_context_iteration () from /lib/x86_64-linux-gnu/libglib-2.0.so.0
#3  0x00007fcb261090a8 in QEventDispatcherGlib::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /lib/x86_64-linux-gnu/libQt5Core.so.5
#4  0x00007fcb260ae74b in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /lib/x86_64-linux-gnu/libQt5Core.so.5
#5  0x00007fcb260b6ce4 in QCoreApplication::exec() () from /lib/x86_64-linux-gnu/libQt5Core.so.5
#6  0x000056310e5abc06 in main (argc=2, argv=0x7fffd12fdaf8) at /home/n/kde/src/utilities/kate/apps/kwrite/main.cpp:194
(gdb)

Debugging core files with GDB

If you have to inspect a crash, you can debug core files. E.g. generate a core file:

$ ulimit -c 100000
$ ulimit -a
core file size              (blocks, -c) 100000
$ # E.g. sudo sysctl -w kernel.core_pattern=core.%u.%p.%t # to enable core generation
$ # E.g. cat /proc/sys/kernel/core_pattern 
core.%u.%p.%t
$ KCRASH_DUMP_ONLY=1 kwrite&
$ killall -SEGV kwrite
[1]+  Segmentation fault      (core dumped) KCRASH_DUMP_ONLY=1 kwrite
$ ls
core.1001.178247.1653874173

You can use gdb with the core file:

gdb kwrite ./core.1001.178247.1653874173 
GNU gdb (GDB) 12.0.90.20220320-git
...
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `kwrite'.
Program terminated with signal SIGSEGV, Segmentation fault.

#0  0x00007f250647fd7f in poll () from /lib/x86_64-linux-gnu/libc.so.6
[Current thread is 1 (Thread 0x7f2500e1ce80 (LWP 178247))]
(gdb)

Improving your gdb experience for KDE/Qt applications

By default GDB cannot pretty print basic Qt types (e.g. QString):

$ gdb kwrite
GNU gdb (GDB) 12.0.90.20220320-git
...
Reading symbols from kwrite...
(gdb) break KAboutData::KAboutData
Breakpoint 1 at 0x2570
(gdb) run
Starting program: /home/n/kde/usr/bin/kwrite 
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7ffff0787640 (LWP 180173)]
[New Thread 0x7fffef3bd640 (LWP 180174)]

Thread 1 "kwrite" hit Breakpoint 1, 0x0000555555556570 in KAboutData::KAboutData(QString const&, QString const&, QString const&, QString const&, KAboutLicense::LicenseKey, QString const&, QString const&, QString const&, QString const&)@plt ()
(gdb) step
Single stepping until exit from function _ZN10KAboutDataC1ERK7QStringS2_S2_S2_N13KAboutLicense10LicenseKeyES2_S2_S2_S2_@plt,
which has no line number information.
KAboutData::KAboutData (this=0x555555559b40 <main::{lambda()#2}::operator()() const::qstring_literal>, _componentName=..., _displayName=..., _version=..., _shortDescription=..., licenseType=KAboutLicense::Unknown, _copyrightStatement=..., text=..., homePageAddress=..., bugAddress=...) at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507     KAboutData::KAboutData(const QString &_componentName,
(gdb) step

Thread 1 "kwrite" hit Breakpoint 1, KAboutData::KAboutData (this=0x7fffffffd9e0, _componentName=..., _displayName=..., _version=..., _shortDescription=..., licenseType=KAboutLicense::LGPL, _copyrightStatement=..., text=..., homePageAddress=..., bugAddress=...) at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507     KAboutData::KAboutData(const QString &_componentName,

Since version 7 GDB supports Python scripting for pretty printers. There are such scripts for basic Qt types (QString, QList, QMap, QHash, QDateTime and many others) in KDevelop git repository. Download this directory and add following lines to your ~/.gdbinit to load the scripts automatically at gdb start:

$ cat ~/.gdbinit 
python
import sys
sys.path.insert(0, '/home/n/.local/misc/kdevelop-plugins-gdb-printers')
from qt import register_qt_printers
from kde import register_kde_printers

register_qt_printers (None)
register_kde_printers (None)
end

set print pretty on

Run gdb:

$ gdb kwrite
GNU gdb (GDB) 12.0.90.20220320-git
...
Reading symbols from kwrite...
(gdb) break KAboutData::KAboutData
Breakpoint 1 at 0x2570
(gdb) run
Starting program: /home/n/kde/usr/bin/kwrite 
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7ffff0787640 (LWP 179991)]
[New Thread 0x7fffef3bd640 (LWP 179992)]

Thread 1 "kwrite" hit Breakpoint 1, 0x0000555555556570 in KAboutData::KAboutData(QString const&, QString const&, QString const&, QString const&, KAboutLicense::LicenseKey, QString const&, QString const&, QString const&, QString const&)@plt ()
(gdb) step
Single stepping until exit from function _ZN10KAboutDataC1ERK7QStringS2_S2_S2_N13KAboutLicense10LicenseKeyES2_S2_S2_S2_@plt,
which has no line number information.
KAboutData::KAboutData (this=0x555555559b40 <main::{lambda()#2}::operator()() const::qstring_literal>, _componentName="", _displayName="", _version="", _shortDescription="", licenseType=KAboutLicense::Unknown, _copyrightStatement="", text="", homePageAddress="", bugAddress="") at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507     KAboutData::KAboutData(const QString &_componentName,
(gdb) step

Thread 1 "kwrite" hit Breakpoint 1, KAboutData::KAboutData (this=0x7fffffffd9e0, _componentName="kwrite", _displayName="KWrite", _version="22.07.70", _shortDescription="KWrite - Text Editor", licenseType=KAboutLicense::LGPL, _copyrightStatement="(c) 2000-2022 The Kate Authors", text="<img height=\"362\" width=\"512\" src=\":/kate/mascot.png\"/>", homePageAddress="https://kate-editor.org", bugAddress="[email protected]") at /home/n/kde/src/frameworks/kcoreaddons/src/lib/kaboutdata.cpp:507
507     KAboutData::KAboutData(const QString &_componentName,
(gdb)